2" Real Wood Blinds

The finest quality wood blinds available, offered in a comprehensive color pallette.  Our wood blinds are true wood products, made from 100% kiln-dried basswood.  There will be variations in color, grain, textures and stability that are characterisitc of all woods.

All blinds come standard with 3 1/2" Colonial Valance and Trapezoid bottom rail. Traditional routed slats can be upgraded to routeless/privacy option or decorative cloth tapes  Decorative cloth tapes allows to you futhure customize this product to match your rooms decor. 

Durable 2 x 2 color coordinated steel head rail.  Premium cordless lift and wand tilt for child safety.

Like any wood furnishings, wood blinds should be dusted regularly to keep them looking new.  Use a soft, clean cloth, chemically treated dust cloth or dusting mitt.

Blinds may also be cleaned by vacuuming them with a brush attachment of a vacuum cleaner or by wiping with a soft, damp rag.  Stained blinds should be treated periodically with lemon oil or other wood preservative.

Our manufacturer warrants that wood blinds from this collection will be free from defects in materials and workmanship for as long as original purchasor owns the products.  See additional information on warranty page.

Some slight warpage, as well as natural variations in color and grain effect are normal with a wood product and are not considered defects.  In addition, some fading and or dicoloration of the finish may occur over time.  This is common with man-made coatings and is not considered a defect.

We offer 1 1/2" wide cloth tape that will be used in conjunction with braided ladder to help support the slats.  The cloth tapes come in a variety of colors to further enhance the decor of your home.

Amp Rechargeable motor options avalable for ultimate control.

Wood Blinds - Measuring and Installation.

Finished Dimensions

Inside Mount Allowance-As with all product, factory will take standard deduction off of width for all blinds ordered as inside mount.  This deduction is ordered width minus 1/2".  No deductions will be taken off of length.

Outside Mount Allowance- No deductions will be taken off of width or length for blinds ordered as outside mount.

Valances

All valances for blinds ordered as inside mount will be cut straight on both ends and will be 1/8" less then ordered width unless otherwise specified.  If you need outside mount valances on your inside mount blinds or have any other valance instructions please specify on special comments on the order screen. 

All valances ordered as outside mount will have mitered corners with 2 5/8" returns. Valances will be approximately 1/2 wider then the blinds ordered width to fit over headrail and brackets.  If you need special returns sizes or special instructions for your valances please list this under the order comments section of the order screen.

All special valance comments must be made at time of order.  Replacement valances due to consumer not specifying instructions at time of order may result in a charge if a new valance needs to be supplied.  

Mounting Requirements Inside Mount

Minimum Casement Depth for bracket attachment 1 1/2"

Minimum Casement Depth for fully recessed blind and valance is 3"

Mounting Requirements for Outside Mount

Minimum flat mounting surface height 1 3/4"

Recommended width overlap per side 1 1/2"

Minimum net width  8 1/2" -12" will be Tilt only

Minimum net width of blind with decorative tapes 8 1/2"

Maximum ordered width and length of 84" will use the Premium cordless option.  Blinds can be made up to 96" x 96" using the Lift N Lock Cordless option. 

Minimum ordered height 12"

If you like this product, you might want to check out our line of 2 1/2" Select Wood blinds.  Wider slats offer a better "view through" when slats are tilted to the open position. 

You may also want to look at Faux Wood Blinds.  An economical alternative to fit in any budget.